Skip to product information
  • Vetonek Tumbonas 2 unidades con mesa y cojines madera maciza de acacia
  • Vetonek Tumbonas 2 unidades con mesa y cojines madera maciza de acacia

Azas 2 units with table and cushions solid wood of acacia

$442.35
$442.35 $497.85
You save 11% ($55.50)
Tax included. Shipping calculated at checkout.
Size
Color

Description

With this game of 2 wooden sun loungers and a table, you will always have a comfortable place to relax in your patio or garden. The exclusive wood structure is cozy and exudes a natural charm. This loravone is made of solid acacia wood, which is intemperie and lasting. Being water resistant, the sunbed is adequate for both interior and exterior use. It can be folded to save storage space when it is not in use. You can have your drinks, phones, books or other small objects at your fingertips at the wooden table. In addition, the cushion included is more than a practical complement; It also has a decorative function. Note: To prolong the life of your outdoor furniture, we recommend that you protect them with a waterproof case.

  • Material: solid acacia wood with a natural oil finish
  • Cushion material: fabric (100% polyester)
  • Loom dimensions (deployed): 184 x 55 x 64 cm (length x width x high)
  • Loom dimensions (folded): 92 x 55 x 20 cm (length x width x high)
  • Dimensions of the table: 40 x 40 x 40 cm (length x width x high)
  • Cushion thickness: 3 cm
  • Gray checkerboard cushion
  • Folding
  • Suitable for use inside and exterior
  • Requires assembly: Yes
  • Delivery contains:
  • 2 x lifeline
  • 1 x table
  • 2 x cushions

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.