Skip to product information
  • Vetonek Red de bádminton con volantes 300x155 cm

Bádminton Network with 300x155 cm flyers

$62.32
$62.32 $70.14
You save 11% ($7.82)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This recreational bádminton network set will allow you not one, but three classic ball games! This robust network and rods can be configured in minutes without the need for tools. It is also easy to dismantle and carefully keep in the transport bag included together with all accessories. The mesh network has double seam to improve its robustness. The height adjustable frame is built with lasting and light steel tubes for easy transport. This set is suitable for bádminton, volleyball, tennis and other ball games that require a network. Shipping includes: 1 network set and bádminton structure, 3 flyers, 4 iron floor pickets, 4 plastic floor pickets, 2 pp wind strings and a transport bag.

  • Color: White and blue
  • Network material: fabric and polyethylene
  • Structure material: steel
  • Network dimensions: 300 x 72 cm (high x width)
  • General dimensions (mounted): 300 x (72-155) (width x high)
  • Adjustable structure height
  • Suitable for several games with ball: bádminton, volleyball, tennis, etc.
  • Delivery includes:
  • 1 x Bádminton Network and Structure
  • 3 x flyers
  • 4 x Iron floor piquetas
  • 4 x plastic soil piquets
  • 2 x Wind strings of PP
  • 1 x transport bag
  • Material: Polyester: 100%

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.