Skip to product information
  • Vetonek Tablero de mesa de bambú 40x80x4 cm

Bamboo table board 40x80x4 cm

$71.09
$71.09 $80.01
You save 11% ($8.92)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Give a new life to your table with this bamboo board. It is a great solution to renew the house table or a commercial establishment, such as restaurants, coffee shops, hotels, etc. Durable material: bamboo is known for its flexibility and hardness. Bamboo furniture is a good option if you want to acquire resistant furniture made of natural materials. As a furniture board. You can also combine it with any stylized leg according to what you need. ROUNDED BLADS: All the corners of the replacement board are rounded by safety. Easy to clean surface: thanks to the varnished finish, the surface of the bamboo table is easy to clean with a Wet cloth. Useful information: The colors and veins vary in each article, so each piece is unique. Delivery is random, ensuring the exclusivity and individuality of the product.

  • Material: bamboo with varnish finish
  • Dimensions: 40 x 80 x 4 cm (length x width x thickness)

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.