Skip to product information
  • Vetonek Juego de muebles de baño madera de ingeniería blanco brillo

Bathroom Furniture Bathroom Wooden Wooden Gloss

$476.54
$476.54 $536.34
You save 11% ($59.80)
Tax included. Shipping calculated at checkout.
Size
Color

Description

With this elegant bath furniture set, you can create extra storage space for your bathroom with a striking and tidy look. Elegant design: clean lines and elegant design are perfectly integrated into the bathroom. The furniture set is composed of a sink with sink, 2 high furniture and a mirror. This elegant sink furniture has 1 compartment and fits perfectly under the sink, which makes the bathroom storage very practical. Made of ceramics, the sink can not only serve as a daily use container, but also as an ornament in your home. Thanks to its avant -garde and modern design, this sink will undoubtedly adapt to any decoration. It is also equipped with an overflow hole to flow the water when it is filled too much. Cadal Mueble Alto has a total of 5 compartments and 2 doors, which offers ample space to save items in the bathroom. The mirror also adds an excellent appearance to the decoration of your home. In addition, this bath set is easy to clean with a damp cloth. Keep in mind: the tap and drain are not included in the delivery.

  • Color: White with shine
  • Embedded sink color: White
  • Material: plywood, acrylic, ceramic
  • Mirror dimensions: 90 x 1.5 x 37 cm (wide x high x high)
  • Dimensions of the Wardcard: 90 x 38.5 x 46 cm (wide x high x high)
  • High furniture dimensions: 30 x 30 x 130 cm (wide x high x high)
  • Dimensions of the built -in sink: 91 x 39.5 x 18.5 cm (length x width x high)
  • Ceramic edge thickness: 4 cm
  • Drainage hole diameter: 4.5 cm
  • With an overflow hole
  • Requires assembly: Yes
  • Delivery contains:
  • 1 x mirror
  • 1 x sink cabinet
  • 2 x high cabinet
  • 1 x built -in sink

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.