Skip to product information
  • Vetonek Estructura de cama sin colchón madera maciza pino 75x190 cm

Bed structure without mattress wood solid pine 75x190 cm

$180.02
$180.02 $202.61
You save 11% ($22.59)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Get a more repairing dream with this bed structure. It is a cozy contribution for any bedroom. Stable and lasting structure: solid pine wood is known for its resistance and durability. Its straight veins and their characteristic knots contribute to their rustic charm. SHEETS SOMIER for optimal support: the bed structure is equipped with a sheet somier for the support and breathability of the mattress. Versatile box: this bed structure comes with A headboard that provides excellent back support when you feel in bed to read or watch television, while it serves as a decorative element. Amplio Storage space: This elegant headboard has two practical shelves, which offer a wide Storage space to have all your essential items for the night at hand. Useful information: The mattress is not included with the bed. We have a varied selection of mattresses. You can take a look at our store to look for the corresponding mattress.

  • Bed structure material: solid pine wood (without treating)
  • SELLONE MATERIAL: plywood
  • Total dimensions: 212.5 x 81 x 82 cm (length x width x high)
  • Adequate mattress dimensions: 75 x 190 cm (width x long) (mattress not included)
  • With storage shelves
  • Requires assembly: Yes
  • Delivery contains:
  • 1 x bed structure
  • 1 x headboard

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.