Skip to product information
  • Vetonek Remolque de bicicleta mascotas hierro tela Oxford azul negro

Bicycle towing Iron Oxford Black Black Black

$147.51
$147.51 $166.03
You save 11% ($18.52)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This practical pet bike towing is a good complement to walk to your pet, since you can enjoy a more comfortable trip. Durable structure: iron is a strong and hard material. It is one of the preferred solid metals in industrial and furniture construction. With an iron structure, the bicycle towing is robust and reliable, and will give you peace of mind when driving by road. Comfortable bicycle trailer: This bicycle load trailer is made of Oxford fabric and has a PVC cover so that your pet does not get wet. In addition, it has a black load board at the bottom to offer a comfortable space. Practical Design: The front and rear doors with zipper facilitate the entrance and exit, and the mesh windows allow the air to circulate inside so that the pet is fresh during the trip. SAFE CONDUCTION: The bicycle load trailer has two Large rear wheels and a small front wheel that guarantee a soft and safe trip on various lands, and reflectors abroad provide visibility in the dark. In addition, the flag increases safety between traffic. Large uses: This bicycle trailer for pets with handle to push is perfect for transporting small dogs and pets and can be easily attached to the bicycle. It can also be used to carry the purchase, camping material, sporting articles, or what you need to take with you!

  • Color: blue/black
  • Material: Oxford fabric, iron, PVC
  • Total dimensions (no thrust bar): 63 x 123 x 66 cm (length x width x high)
  • Cabin dimensions: 50 x 70 x 50 cm (length x width x high)
  • Handlebar height to push from the ground: 100.5 cm
  • Flag length: 139 cm
  • Maximum load capacity: 45 kg
  • Cargo capacity of the traction bar: 3-11 kg
  • Requires assembly: Yes

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.