Skip to product information
  • Vetonek Sillón elevable tela negro

BLACK FABRIC ELEVABLE CHAIR

$396.41
$396.41 $446.15
You save 11% ($49.74)
Tax included. Shipping calculated at checkout.

Description

Sit down and rest in this very comfortable elevation. Manual reclining function: The reclining chair is specially designed with 3 reclining positions so you can adjust the backrest and handrest by hand according to what you want. Electric elevation function: This reclining armchair for older people is equipped with an electric motor to The elevation function. Thanks to the function that the entire chair pushes up, you can easily stand without forcing your back and knees with the manual control of 2 buttons. As a seat: the padded seat, the backrest and the wide armrests covered with fabric provide a Comfortable and cozy feeling, so you are wonderful while you feel. The fabric has a simple and clean appearance, and is breathable and lasting. Massy and stable structure: the structure, made of wood and metal, provides strong structure and stability. This reclining armchair is comfortable and durable.

  • Color: black
  • Material: fabric (100% polyester), metal
  • Total dimensions: 72.5 x 96 x 99.5 cm (wide x high x high)
  • Limited dimensions: 72.5 x 136.5 x 81 cm (wide x high x high)
  • Seat dimensions: 49 x 55 cm (deep x width)
  • Seat height from the ground: 48 cm
  • Height of the headquarters from the ground: 59 cm
  • Entrance: DC 28 V, 1.5 A
  • With 2 holders
  • AJUSTABLE REPATIS AND BACK
  • With an electric motor for lifting function
  • Requires assembly: Yes
  • Delivery contains:
  • 1 x reclining armchair
  • 1 x adapter for lifting function
  • 1 x Manual control for lifting function
This device is not intended to be used by people (including children) with reduced physical, sensory or mental abilities or lacking experience and knowledge, unless they are supervised or have received instructions on the use of the apparatus by a person responsible person of your safety. This product is not a toy. Do not allow children to play with the device.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.