Skip to product information
  • Vetonek Kit de herrajes para puertas correderas acero negro 200 cm

BLACK STEEL BLACK DIEWORK KIT 200 CM

$115.89
$115.89 $130.42
You save 11% ($14.53)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This corrections kit for sliding doors is ideal for extending the length of the rails of its flat sliding door! Safe and reliable: Thanks to internal bearings, the doors can slide gently and silently. Door stops are also included to avoid the derailment of the roller, while rubber packing will cushion the roller pump and reduce the noise. Corrosion, which guarantees lasting performance. Easily connect two rails for barn doors using assembly accessories included with the rail connector for barn doors. Simply place the rail connector at the ends of the rails, adjust the screws well and will be ready for a problem without problems. Useful information: Delivery includes only the sacking doors kit. The door is not included in the delivery. It is necessary to drill previously each end of the rail with 2 holes for proper installation.

  • Color: black
  • Material: Powder coating steel
  • Maximum load capacity: 100 kg
  • Total length of the sliding guide: 200 cm
  • Adequate door dimensions: 100 cm wide, 35-45 mm thick
  • Reloon Union for Garnero doors:
  • Dimensions: 8 x 3 x 0.4 cm (length x width x high)
  • Distance between the centers of the holes: 2 cm
  • Compatible barn door rail size: 40 x 6 mm (high x width)
  • Number of holes: 4
  • Delivery contains:
  • 4 x sliding lanes
  • 4 x door bumps
  • 4 x rollers
  • 10 x fixing clamps
  • 2 x Soil guide
  • 1 x union of rails for barn doors
  • Other necessary devices

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.