Black WPC Valla Panel 180x146 cm

$350.74
$350.74 $394.75
You save 11% ($44.01)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This fence panel can be used as close to garden or as a residential fence for greater privacy and safety. Made of WPC (composed of wood and plastic), the garden fence is durable and resistant to rot or oxidation. The garden barrier has a wooden vein on one side and a normal print in the other, so you can choose the design you like best. Thanks to the upper aluminum profile, the fence boards can be placed firmly next to the other, which reinforces its rigidity and strength in front of the blows. Designed with the modular system, the fence boards are easy to install and allow you to expand freely. These posts have 3 slots, so that you can mount the fence in various ways, for example, in a straight line (180 degrees), straight angle (90 degrees) or T -shape. Multiusous steel legs can be fixed in two ways . The first is screwing them on the surface, using the anchor screws supplied. The second is to anchor them in a cement base, using the ground pipe (not included).

  • Color: black
  • Material: WPC (compound of wood and plastic), aluminum, steel
  • Total dimensions: 180 x 146 cm (high x width)
  • Board dimensions (each): 170 x 20.3 cm (high x width)
  • Final bar length: 170 cm
  • Post dimensions: 7 x 7 x 145 cm (length x width x high)
  • Requires assembly: Yes
  • Delivery includes:
  • 7 x Valla Boards
  • 2 x poles with steel base
  • 1 x aluminum final bar
  • Assembly accessories

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.