Skip to product information
  • Vetonek Láminas para coches 2 uds rojo mate 100x150 cm+50x150 cm

Cars for cars 2 uds matte red 100x150 cm+50x150 cm

$22.62
$22.62 $25.46
You save 11% ($2.84)
Tax included. Shipping calculated at checkout.
Size
Color

Description

These water resistant cars is ideal for automotive uses. They can be used inside a vehicle such as interior doors, central consoles and boards or outside a vehicle for applications such as rearview mirrors, exterior panels, wheel steps, hood and bumper to create a high -tech appearance, which is much more profitable than a real painting work! With an excellent ability to adhesion, the cars film can adhere to any smooth surface and take off effortlessly and without leaving marks. The air channels on the back of the film guarantee an application without bubbles. These self -adhesive cars, made of good quality PVC, is easy to clean and provide years of reliable use. Tips: These cars sheets become more elastic when warming them carefully, eg, with a dryer or a heat gun.

  • Color: Mate
  • Material: Environmental PVC
  • Width: 50 cm, 100 cm
  • Length: 150 cm
  • Thickness: 0.14 mm
  • Self -adhesive
  • Reverse air channels make it out of bubbles
  • Delivery includes:
  • 1 x 50x150 cm car sheet
  • 1 x 100x150 cm car sheet

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.