Christmas Carmban Lights Remote Control 40 UDS Blue Acrylic

$26.75
$26.75 $30.11
You save 11% ($3.36)
Tax included. Shipping calculated at checkout.
Size
Color

Description

These Christmas Carámbano lights are perfect to decorate your garden, porch and door. They are destined to make your home more beautiful and vivid. These caramban chains are made of acrylic, which gives them a real ice appearance. These decorative lights are equipped with low consumption LEDs, which makes them lasting for long -term use. It has 8 different lighting effects: combination mode, waves, sequential mode, slow shine mode, flickering, slow discoloration mode, turn and continuous lighting. The remote control included allows you to adjust the remote lighting modes. Carámbano lights are very suitable both indoors and outdoors. Note: The USB included is not waterproof, so this part should avoid water, but thanks to the extension cable, the caramban light can be used outdoors since the cable and the product are waterproof . The product has a USB connector, but the 5 V certified USB supply source is not included.

  • Light color: blue
  • Material: Acrylic
  • Long: 11/16 cm
  • LED number: 40
  • Cable length: 2 m
  • With remote control
  • Includes 8 light effects
  • Dual USB connection
  • Suitable for interiors and exteriors
  • Delivery contains:
  • 20 x Carámbano lights (11 cm)
  • 20 x Carámbano lights (16 cm)
This product works with 5 V CC, but does not include the 5 V Certified USB supply source. A higher voltage can cause overheating and cause damage to the device and a possible risk of overheating and fire. Keep new and used batteries out of reach of children.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.