Skip to product information
  • Vetonek Cojines sillas de jardín 4 uds tela Oxford antracita 50x50x7 cm

Cojines sillas de jardín 4 uds tela Oxford antracita 50x50x7 cm

$49.26
$49.26 $55.45
You save 11% ($6.19)
Tax included. Shipping calculated at checkout.
Tamaño
Color

Description

¡Dale un look nuevo al espacio al aire libre de la casa en un instante con estos cómodos cojines de silla! Material duradero: La tela oxford es ligera, resistente al agua y también a los daños y la suciedad. El hilo usado para el tejido hace que la tela sea duradera y transpirable. También es naturalmente resistente a las arrugas.Relleno blando: El cojín de jardín está relleno de fibra hueca de PP para ofrecer una comodidad de asiento óptima y ultra blanda. El cojín de silla recupera su forma original después de cada uso.Amplios usos: El cojín no solo sirve para usar al aire libre, por ejemplo en el jardín o el patio, sino que también puede utilizarse dentro de casa como cojín de silla o cojín de silla de oficina. Además, es un bonito adorno que da un aspecto nuevo a la casa.Diseño antideslizante: Las cuerdas facilitan colocar el cojín en los muebles para que no se muevan de su sitio. Información útil:El producto se envasa al vacío, por lo que requiere un tiempo para expandirse y recuperar su forma original.

  • Color: Gris antracita
  • Material: Tela Oxford (100% poliéster)
  • Material de relleno: Fibra hueca de PP
  • Dimensiones (cada uno): 50 x 50 x 7 cm (largo x ancho x grosor)
  • Longitud de cuerda (cada una): 30 cm
  • Con 2 juegos de cuerdas
  • Repele el agua
  • La entrega contiene:
  • 4 x Cojín

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.