Skip to product information
  • Vetonek Temporizador de agua digital salida única y sensor de humedad
  • Temporizador de agua digital salida única y sensor de humedad vidaXL
  • Temporizador de agua digital salida única y sensor de humedad vidaXL
  • Temporizador de agua digital salida única y sensor de humedad vidaXL
  • Temporizador de agua digital salida única y sensor de humedad vidaXL
  • Temporizador de agua digital salida única y sensor de humedad vidaXL
  • Temporizador de agua digital salida única y sensor de humedad vidaXL

Digital water timer Unique output and humidity sensor

$80.62
$80.62 $90.72
You save 11% ($10.10)
Tax included. Shipping calculated at checkout.

Description

Turn your hose into a programmed irrigation system with this digital water timer! The water timer is responsible for watering the plants for you on specific days of the week, every few days or when you need it, which makes it ideal for irrigation in your grass, garden, patio, greenhouse, flower solid, etc. . The garden irrigation timer is resistant to water and corrosion, which guarantees a long useful life. This spray timer, which has an automatic irrigation system, is designed to save water and time. The timer allows simple installation and programming. The start time, the execution time and the cycle can be configured in advance. The operating time varies from 1 minute to 4 hours, and the irrigation frequency can be configured every 6h, 12h or one day or any day of the week. In addition, the tapa of timer also includes a terminal output that can be connected with a rain sensor (not included) or humidity sensor (not included). Therefore, the timer omits irrigation during rainy days or when the ground is too humid. The soil humidity sensor is equipped with a 5 -meter long cable that connects to the water timer or controller and sends moisture. The soil moisture sensor is water resistant and is designed for outdoor use. You can insert the pointed panels into the ground. When it detects that the ground is wet enough, the program that originally settled to water will be omitted to avoid excessive irrigation and save water. Simply configure the control button on one of the three levels to adapt to the particular moisture requirements of your plants.

  • Irrigation timer
  • Color: gray and red
  • Material: Plastic
  • Voltage: DC 3 V
  • IP classification: IP X6
  • Water pressure: 0.5-8 bars
  • Instruction Manual Irrigation Time: Up to 4 hours
  • Irrigation time: adjustable from 1 minute to 4 hours
  • Easy Reading LCD Screen
  • With unique output
  • Suitable for 26.5 mm tap (G 3/4 ")
  • Required battery: 2 x Aa alkaline batteries (not included)
  • Moisture sensor
  • Cable length: 5 m
  • Humidity range: 25%, 45%, 65%
  • Delivery includes:
  • 1 x water controller
  • 1 x humidity sensor
This timer is designed only for outdoor use to control sprinklers or irrigation systems. The equipment cannot be used for industrial purposes, such as food, chemical and pesticides.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.