Skip to product information
  • Vetonek Tumbona doble con toldo ratán sintético marrón

DOUBLE LOBER WITH BROWN SYNTHETIC RATAN

$461.86
$461.86 $519.81
You save 11% ($57.95)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This loraked with 2 -seater awning combines style and functionality, it is ideal if you want to rest near the pool, in your patio or in the garden. The steel structure with powdered coating makes the loravone very stable and lasting. The comfortable and thick cushions are made of hydrophuge polyester. In addition, the covers are equipped with zippers to be removable and washable. This loraked can be adjusted in 4 different positions on both sides, for more comfort when sitting or lying. Made of UV -resistant polyester, the awning will block the harmful ultraviolet rays of the sun. The resistant awning can be withdrawn if you want to tan. The sunbed is easy to mount. The loravone is made of rattan of impermeable and weatherproof, it is easy to clean, resistant and adequate for daily use. Note: We recommend that you cover the sunbed in conditions of rain, snow and frost.

  • Ratán color: brown
  • Cushion color: cream white
  • Material: Steel Structure + Ratán Pe
  • Cushion material: Polyester case with foam filling
  • Dimensions: 194 x 120.5 x 156 cm (length x width x height)
  • Seat height from the ground (without cushion): 30 cm
  • Size of each cushion: 194 x 60 cm (length x wide)
  • Cushion thickness: 5 cm
  • Awning width: 128 cm
  • Both sides are adjustable in 4 positions
  • Removable and washable cushion covers

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.