Skip to product information
  • Vetonek Tocador con LED y 2 armarios madera contrachapada blanco brillo

Dresser with LED and 2 Wooden Wooden Cupwood Glass

$273.71
$273.71 $308.05
You save 11% ($34.34)
Tax included. Shipping calculated at checkout.

Description

The dressing table with LED and 2 cabinets, really simple to long, combines perfectly with different types of decoration. Durable material: The dresser with LED and cabinets is made of plywood. The plywood is of exceptional quality, with a smooth surface, and is also characterized by its strength, stability and moisture resistance. LED LED: The makeup table with cabinets has LED bulbs with USB, which can be easily changed warm white mode. The LED bulbs around the mirror also illuminate your beauty. Management Storage space: The dresser with 2 storage cabinets offers a wide storage space with compartments, perfect for organizing makeup, accessories, bags and beauty items. WARNING: To avoid overturning, this product should be used with the device provided to fix it to the wall. Note: Each product comes with a mounting manual in the box to facilitate assembly.

  • Color: White with shine
  • Material: plywood, acrylic
  • Dimensions of the tarding table: 60 x 40 x 140 cm (wide x high x high)
  • Dimensions of the lower closet: 80 x 40 x 75 cm (wide x high x high)
  • Dimensions of the upper closet: 80 x 40 x 65 cm (wide x high x high)
  • Delivery includes:
  • 1 x LED dressing table
  • 2 x cabinets
Do not use this article if any component is broken, torn or foul. This product works with 5 V CC, but the 5 V certified USB supply source is not included. High voltage can cause overheating and can cause damage to the device and the potential risk of overheating and fire.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.