Black Acrylic Bathroom Mirror Brillo 40x8,5x37 cm V14
Description
Add an aesthetically pleasant touch to your bathroom with this LED mirror, which adds a contemporary style to any room. The wall mirror is made of plywood and acrylic wood, so it is lasting and stable. This mirror has an RGB light, so you can change the color of the LED. In addition, it is easy to clean with a damp cloth. Elegant and functional, this mirror is intended to make your room design authentic and exceptional. Note: The mirror is made of light and quality acrylic material, which is safer and more resistant than glass. You must remove the protective film before using the mirror. The product has a USB connector, but the 5 V certified USB supply source is not included.
- Color: bright black
- Material: plywood, acrylic
- Dimensions: 40 x 8.5 x 37 cm (wide x high x high)
- Includes RGB light
- Requires assembly: Yes
- Keep in mind that screws and tacos for the interior of the wall are not included. Search and use screws and tacos suitable for your walls. If you are not sure, seek professional advice. Read and continue every step of the instructions carefully.
¿Cuanto material necesitas?
¿Cuanto material necesitas?
How much stone do I need?
How much stone do I need for the ground?
For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.
For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.
For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm
How much stone do I need to fill a gabion?
Density of ± 1,650kg by 1m³.
The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.
Clarifications
ATTENTION!
Granulometries are sizes of sizes
Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.
Broken stones
On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.
In the photos you can see, only real products are seen, broken pieces have been removed.
Dust and sand in products
This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.