Skip to product information
  • Vetonek Estructura de cama doble madera maciza pino negro 135x190 cm

Estructura de cama doble madera maciza pino negro 135x190 cm

$152.60
$152.60 $171.75
You save 11% ($19.15)
Tax included. Shipping calculated at checkout.

Description

¡Lleva la ruta moderna a tu dormitorio con esta estructura de cama de madera! Es un aporte práctico y decorativo para tu hogar. Madera de pino maciza: La madera de pino maciza es un bonito material natural. La madera de pino tiene vetas rectas, y los nudos dan al material su distintivo aspecto rústico.Estructura de cama estable: La estructura de madera garantiza su solidez y estabilidad.Listones robustos: Los listones de madera contrachapada proporcionan una buena distribución del peso, lo que garantiza que el colchón se mantenga en tu sitio con cada giro y vuelta del cuerpo mientras duermes. Nota: La lona impermeable no está incluidaLa entrega incluye solo una estructura de cama. El colchón no está incluido. Puedes echar un vistazo en nuestra tienda para buscar colchones a juego.Esta estructura de cama es adecuada para un colchón de 135 x 190 cm (doble).Cada producto viene con un manual de montaje en la caja para facilitar el montaje.

  • Color: Negro
  • Material de la estructura de cama: Madera de pino maciza
  • Material de los listones: Madera contrachapada
  • Dimensiones totales: 193,5 x 139 x 9 cm (largo x ancho x alto)
  • Dimensiones adecuadas del colchón: 135 x 190 cm (ancho x largo) (el colchón doble no está incluido)

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.