Estructura de cama sin colchón apilable blanca 100x200cm

$194.16
$194.16 $218.52
You save 11% ($24.36)
Tax included. Shipping calculated at checkout.
Tamaño
Color

Description

Este marco de cama apilable de madera ofrece una solución práctica y que ahorra espacio para cualquier hogar. Estructura estable y duradera: La madera de pino maciza es conocida por su resistencia y durabilidad. Sus vetas rectas y sus característicos nudos contribuyen a su encanto rústico.No requiere somier: el marco de la cama incluye una base de láminas que proporciona un excelente soporte y transpirabilidad para su colchón, eliminando la necesidad de un somier.Apilable y versátil: este marco de cama cuenta con un diseño apilable que ahorra espacio y te permite comprar dos camas sin necesidad de espacio adicional. Úsalo como cama individual apilando dos marcos o desapílalos para crear una cama doble cuando necesites espacio adicional para que duerman tus invitados.Compacto y ahorra espacio: con su diseño compacto, el marco de la cama es ideal para espacios reducidos o techos bajos, lo que le permite maximizar el área disponible sin sacrificar el estilo ni la comodidad. Información útil:Para mejorar la estabilidad al apilar dos camas, coloque un colchón entre la cama superior y la inferior. Esto ayuda a distribuir el peso de manera uniforme y mejora el soporte.

  • Color: Blanco
  • Material de la estructura de cama: Madera de pino maciza
  • Material de los listones: Madera contrachapada
  • Dimensiones: 203,5 x 103,5 x 28 cm (largo x ancho x alto)
  • Dimensiones de colchón compatible: 100 x 200 cm (ancho x largo) (colchón no incluido)
  • Grosor adecuado del colchón: 15 - 20 cm
  • Capacidad de peso maxima: 100 kg
  • Diseño apilable
  • Requiere montaje: Sí

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.