Skip to product information
  • Vetonek Estructura columpio exterior y 2 ganchos para colgar acero azul

Exterior swing structure and 2 hooks to hang blue steel

$112.92
$112.92 $127.09
You save 11% ($14.17)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Turn your garden into a playground for your children with this swing! Resistant Metal Material: This swing frame is made of painted steel tubes that are oxide resistant, exceptionally robust and deformation resistant, which guarantees excellent stability and durability. Solid and stable structure: This swing support has an A -shaped frame, which provides strong support without staggering. The reinforced union reinforced considerably reinforces the general structure. In addition, four additional ground pins improve stability and safety. Useful information: The swing structure is not compatible with a saucer swing. The swing structure is included in the shipment, but the seats are sold separately. You can visit the store to find the matching seats or accessories to complete your swing.

  • Color: Blue and dark green
  • Material: painted steel
  • Dimensions: 156 x 185 x 185 cm (length x width x height)
  • Max: 50 kg load capacity
  • Suitable for a maximum of 1 child
  • Recommended age: 3-10 years
  • Number of hooks to hang: 2
  • For outdoor use
  • Requires assembly: Yes
    • Delivery contains:
  • 1 x swing structure
  • 4 X Earth pins
  • WARNING: Not suitable for children under 36 months.
  • Warning: only for domestic use.
Warning. Not suitable for children under 3 years. Only for domestic use.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.