Skip to product information
  • Vetonek Sillas de bistro plegables con cojines 6 uds bambú gris oscuro

Foldable bistro chairs with 6 units dark gray bamboo

$448.47
$448.47 $504.73
You save 11% ($56.26)
Tax included. Shipping calculated at checkout.
Size
Color

Description

These bistro chairs, made of solid bamboo, will be a great choice for your family to read or read and relax. Durable material: bamboo is known for its flexibility and hardness. Bamboo furniture is a good option if you want to acquire resistant furniture made of natural materials. Use, to facilitate their storage and transport. Comfortable seat experience: these chairs, with coarly padded cushions, offer a comfortable seat experience. Removable and washable found: These seat cushions have timable covers to facilitate washing and maintenance. The cushions of the cushions have a rear flap that allows them to easily adhere to the backs. Useful information: To make sure that your outdoor furniture stays beautiful, we recommend protecting them with an impermeable case.

  • Max. loading (per seat): 110 kg
  • Chair:
  • Material: bamboo
  • Dimensions: 59 x 51 x 87 cm (wide x high x high)
  • Seat height from the ground (without cushion): 47 cm
  • Cushion:
  • Color: dark gray
  • Cover material: fabric (100% polyester)
  • Seat cushion filling material: foam
  • Backup cushion filling material: cotton fiber
  • Seat cushion dimensions: 42 x 38 x 4 cm (width x deep x thickness)
  • Backup cushion dimensions: 42 x 17 x 4 cm (length x width x thickness)
  • Delivery contains:
  • 6 x chair
  • 6 x seat cushions with removable and washable case
  • 6 x support cushions
Maximum 110 kg per seat. Take into account the risk of open fire and other sources of intense heat in the vicinity of the product.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.