Skip to product information
  • Vetonek Mesa auxiliar plegable madera maciza de álamo marrón

Folding Auxiliary Table Maciza Wood Brown Alamo

$39.42
$39.42 $44.36
You save 11% ($4.94)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Place the folding auxiliary table in the living room or in your outer courtyard to enjoy magnificent books and a cup of coffee. Durable and resistant: The structure of the frame of this auxiliary table is made of poplar, which guarantees robustness, durability and excellent support for your rest. Fácil to transport and save: This auxiliary table is foldable and light, so it is Easy to transport and save after folding it. It does not take long. Easy to clean: This auxiliary table has paint, so it is water resistant, easy to clean and easy to maintain. Lamas design: The auxiliary table has a lame design that allows water to flow and be aired. : This auxiliary table can be used as a folding stool, folding table and folding and exterior folding rest, which allows you to spend time in your living room, bedroom, patio, front patio or porch. Useful information: To make sure that your outdoor furniture stays beautiful, we recommend protecting them with an impermeable case.

  • Color: Brown
  • Material: Sounded Alamo Wood
  • Dimensions (deployed): 35 x 35 x 46 cm (wide x high x high)
  • Folded dimensions: 60 x 35 x 5 cm (length x width x high)
  • Maximum load capacity: 25 kg
  • Requires assembly: Yes

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.