Skip to product information
  • Vetonek Sillas de jardín plegables 6 uds madera maciza acacia textileno

Folding garden chairs 6 units solid wood acacia textilene

$553.87
$553.87 $623.38
You save 11% ($69.51)
Tax included. Shipping calculated at checkout.
Size
Color

Description

These classic wooden garden chairs, with an elegant and timeless design, provide a comfortable seat in the garden or patio. First quality solid wood: These folding chairs are made of acacia wood. Acacia solid wood is a beautiful natural material. Acacia wood is a tropical hard, dense, robust and lasting wood. Water resistant material: thanks to breathable and water resistant textilene tissue, dining chairs support moisture and rain. They can also be easily cleaned with a damp cloth if they need it. Adjustable surface: Enjoy the maximum comfort by choosing the optimal position and angle thanks to the adjustable backrest. Folding design: the garden dining chairs can be folded to save space when They use. Note: To prolong the life of your outdoor furniture, we recommend that you protect them with a waterproof case. Each product comes with a mounting manual in the box to facilitate assembly.

  • Fabric color: black
  • Material: solid acacia wood with an oil finish, textilene
  • Dimensions: 57.5 x 72 x 109 cm (wide x high x high)
  • Seat height from the ground: 43 cm
  • 5 reclining positions
  • Delivery includes:
  • 6 x garden chairs
Maximum 110 kg per seat.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.