Skip to product information
  • Vetonek Funda completa coche Sedan protección al granizo XXL gris/plata

Full case car sedan hail protection xxl gray/silver

$133.39
$133.39 $150.13
You save 11% ($16.74)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This sedan cover protects your vehicle against UV rays, scratches, hail, snow, rain, frost, dust, falling leaves, industrial pollution and bird droppings, which makes it ideal for use for use indoors and exteriors. Reliable hail protection: The car cover has a 4 mm thick Eva foam layer that effectively absorbs the impact of hail. Even during extreme hail storms, the cover protects the windshield from penetrations, protects against severe blows and offers tranquility. High visibility reflector: This car cover incorporates a reflector in the rear, which improves visibility at night and reduces the Accident risk. Good ventilation: ventilation grilles promote optimal ventilation inside the car cover, helping to prevent moisture accumulation and maintain a breathable atmosphere for your vehicle. DESIGN WIND PROPERTY: The elastic edges of the case They guarantee a perfect adjustment for your car, while adjustable straps with buckles at the bottom keep it safe, even on suction old days. Save fácile: This car cover comes with a practice storage bag, so it is easy to Save when it is not in use. Useful information: Before buying, please take the exact measurements of your car to make sure you select the correct size.

  • Color: gray and silver
  • Upper material: knitted fabric, eva foam and non -woven fabric
  • Side material: oxford with silver lining
  • Eva 4 mm foam thickness
  • Dimensions: XXL 578 x 202.5 x 118.5 cm (length x width x high)
  • Number of buckle straps: 3
  • Number of air outlets: 2
  • Elastic edges at the front and rear
  • High visibility reflector
  • Scratch
  • Water resistant
  • Interior and outdoor use
  • Delivery contains:
  • 1 x car cover
  • 1 x Storage bag

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.