Garden Chairs 6 UDS Maciza Teak Wood with Gray Cushions

$619.00
$619.00 $696.67
You save 11% ($77.67)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This game of wooden garden chairs consists of 6 units and is destined to be a great contribution to the garden, the terrace or the patio. You can relax and chat with family and friends or enjoy good weather. Made with very durable teak wooden wood, this teak furniture has been cured, dried in oven and then finely sanded to give it a very soft appearance. Teak wood is known for its exceptional strength and climate resistance, so it is much more suitable for garden furniture than any other type of wood. Teak wood is the perfect choice if you want to acquire a durable garden furniture. The sanded surface is easily cleaned with a wet cloth. In addition, these garden chairs are light, which makes them totally flexible and easy to move. If you don't use them, wooden chairs can fold to save space. Likewise, the seat cushions included reinforce seat comfort.

  • Cushion color: Gray
  • Material: Teak wood finely sanded with a water -based finish
  • Cushion material: 100% polyester
  • Dimensions: 55 x 60 x 89 cm (wide x high x high)
  • Seat width: 45 cm
  • Seat depth: 37 cm
  • Seat height from the floor: 45 cm
  • Height of the headquarters from the ground: 66 cm
  • Cushion dimensions: 40 x 40 x 3 cm (length x width x thickness)
  • With plags
  • Folding for easy storage
  • Delivery contains:
  • 6 x garden chairs
  • 6 x seat cushions
Maximum 110 kg per seat.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.