Skip to product information
  • Vetonek Soportes plantas jardín con 3 anillas 5 uds acero verde 45 cm

Garden plants supports with 3 rings 5 ​​green steel 45 cm

$25.81
$25.81 $29.05
You save 11% ($3.24)
Tax included. Shipping calculated at checkout.
Size
Color

Description

These practical supports for garden plants guarantee optimal conditions, and guarantee the growth of various types of fruity, flowers and climbing vegetables. Durade material: The support ring for garden plants is made of resistant steel, so it offers durable performance. Robust structure: The tomato tutor is designed with stakes and rings to guarantee the stability of the entire structure. Support function. : For plants that need support to withstand strong winds, rain or abundant flowering, plants support allows them to grow upright and maintain a good appearance. Amlies uses: The stake for plants is ideal for growing tomatoes, cucumbers, hortans, peonies and climbing or vines plants. It is suitable for indoor and exterior pots or to grow on the outer floor, where the earth is a bit deeper so that the stake can be better fixed.

  • Color: Green
  • Material: Polypropylene coating steel
  • Dimensions: 18/16/14 x 45 cm (Diameter X High)
  • Delivery includes:
  • 5 x supports for garden plants

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.