Skip to product information
  • Vetonek Sombrilla de jardín poste de madera rojo burdeos 300x300x273 cm

Garden umbrella Burgundy red wood 300x300x273 cm

$98.45
$98.45 $110.81
You save 11% ($12.36)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This garden umbrella is perfect to create some shadow and protect you from the harmful ultraviolet rays of the sun. Durade material: made of anti -dolus and UV protection polyester, the umbrella provides you with the optimal protection against the sun and is easy to clean. Stable structure: the strong hard wood post and the lasting rods make the garden umbrella very stable and durable. Wind vendilation: the extra piece of fabric at the top of the umbrella allows wind and heat to circulate, so the parasol is a wonderful choice for the outdoor space of the house. Fácil to use : The outdoor umbrella opens and closes easily thanks to the double pulley system. Note: This product is not 100% waterproof. We recommend treating this product with a waterproof spray for better water resistance.

  • Color: Bordeaux red
  • STRUCTURE MATERIAL: Mine hard wood with teak color, laminate bamboo
  • Cover material: fabric (100% polyester)
  • Total dimensions: 300 x 300 x 273 cm (wide x high x high)
  • Post diameter: 38 mm
  • With air outlet
  • Includes 8 rods
  • It has a double pulley system
  • Requires assembly: Yes

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.