Skip to product information
  • Vetonek Jardinera con forma de carretilla madera de abeto 128x45,5x43cm

Gardener in the shape of a tote wood 128x45,5x43cm

$80.15
$80.15 $90.20
You save 11% ($10.05)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Do you want to give a boring garden a color? Well, place your favorite plants and flowers in this beautiful wooden gardener with the shape of a truck! Sounded fir wood: The garden wheelbarrow is made of solid fir wood. The solid fir wood is a beautiful natural material, which is not dry or deform if it is exposed to moisture. : The wheelbarrow -shaped wooden gardener comes with a wooden wheel and two handles so you can easily move it through the garden, the patio or the terrace. Drainage handle: the wooden wheelbarrow has two drain holes in the background , so that you do not worry if the roots rot for excessive irrigation. Attractive design: both if you use it as a decorative flower truck and gardener, the garden truck form makes the house more beautiful.

  • Material: solid firing wood with aqueous base finish
  • Total dimensions: 128 x 45.5 x 43 cm (wide x high x high)
  • Jardinera dimensions: 51.5 x 45.5 x 24.5 cm (deep x width x high)
  • Capacity: 40 l
  • Requires assembly: Yes

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.