GODY FOR CHILDREN WOOD BROWN WOOD

$62.83
$62.83 $70.71
You save 11% ($7.88)
Tax included. Shipping calculated at checkout.
Size
Color

Description

A comfortable rockinger to accompany the child for a while of leisure and tranquility. Durable and comfortable: The rocking chair has a robust Álamo wooden frame, which guarantees its durability. Its smooth balancing movement provides a soothing effect, allowing your children to relax comfortably. Cleaning fácile: This rocking chair has paint, so it is water resistant, easy to clean and easy to maintain. SECURITY: The special angle of the feet of the chair and the anti overturus design obtained after years of experience protect your child from the risk of overturn. Lamas design: the rocking chair presents a lame design that allows the water to flow and be aired.Amplios Uses: The versatile design From the bodybuilding it allows it to place it anywhere, from a porch covered to a patio, garden, balcony, or inside the living room, providing your child with a comfortable place to rest and play. Useful information: To make sure that your outdoor furniture stays beautiful, we recommend protecting them with an impermeable case.

  • Color: Brown
  • Material: Sounded Alamo Wood
  • Total dimensions: 36 x 46.5 x 57 cm (wide x high x high)
  • Seat dimensions: 27.5 x 30 cm (deep x width)
  • Maximum load capacity: 110 kg
  • Adequate ages: 3-6 years
  • Requires assembly: Yes
Do not place this product near a window, since the child can use it as a step and make it fall out the window. Take into account the risk of open fire and other sources of intense heat in the vicinity of the product. Do not place this product near a window where the cords of the blinds or curtains can strangle a child.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.