Skip to product information
  • Vetonek Tienda de campaña para coche impermeable gris y naranja

Gray and orange waterproof car tent

$74.10
$74.10 $83.40
You save 11% ($9.30)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This car tent can quickly and easily convert your vehicle into a practice and comfortable camping house, offering flexibility and extra space on camping holidays, festivals and road trips. Waterproof: This camping store, made of polyester with PU coating, is waterproof and wind -resistant. Easy to assemble: The store has robust rods and wealth straps that easily anchor it to the ground and connect it to your car, eliminating the need to look of clamping they provide a safe anchor for the camping fence, which guarantees stability even on wind days on the beach or in the campsite. What is an excellent companion for outdoor adventures such as camping, hiking and other outdoor events. Light and laptop: The folding and light design allows you to easily pack the store and save it in the transport bag included to facilitate its transport. WARNING: Keep all the flames and heat sources away from the fabric of this product.

  • Color: gray and orange
  • Material: Polyester 185t with PU coating
  • Total dimensions: 340 x 180/250 x 200 cm (length x width x high)
  • Packaging dimensions: 63.5 x 25 x 13 cm (length x width x high)
  • Weight: 3.75 kg
  • Type of store: car store
  • Requires assembly: Yes
  • Delivery contains:
  • 1 x store
  • 1 x transport bag
GPSR

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.