Skip to product information
  • Vetonek Invernadero de aluminio gris antracita 3,97 m³

Gray Gray Aluminum Greenhouse 3.97 m³

$296.44
$296.44 $333.63
You save 11% ($37.19)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This wide greenhouse has a total area of ​​2.41 m². It can accommodate a considerable number of plants and will be a great solution to protect your cold plants. The greenhouse is made of PC plate, which is transparent and allows you to easily observe the growth of plants. The greenhouse has a resistant and maintenance free aluminum construction for greater stability. The ceiling vent guarantees optimal ventilation on hot days. The roof panels are fixed with metal clips, which guarantees durability and long -term use. Keep in mind that the roof of this greenhouse cannot endure strong snowfall. WARNING: The greenhouse is not a construction building or a gallery. It is an independent and temporary agricultural installation, destined exclusively to garden fans.

  • Color: anthracite and transparent
  • Material: Aluminum, PC plate
  • Dimensions: 128 x 188 x 131/199 cm (wide x high x high)
  • Door dimensions: 62 x 154 cm (high x width)
  • Land surface: 2.41 m²
  • Capacity: 3.97 m³
  • Panel thickness: 4 mm
  • Base frame height: 7 cm
  • With galvanized base frame
  • UV -resistant
  • Requires assembly: Yes
The greenhouse is not a construction building or a greenhouse for recreational purposes. It is an independent and temporary agricultural installation destined only to recreational gardening.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.