Hailo staircase with 2 mini 45 cm steel 4310-001

$68.39
$68.39 $76.98
You save 11% ($8.59)
Tax included. Shipping calculated at checkout.

Description

This folding ladder Hailo Mini makes repair and cleaning tasks at home, the garden or the workshop more practical. The small and compact scissors staircase has 2 large steps with non -slip mats and adapts to every corner. There is a hinge lock with release button. The non -slip plastic legs keep it stable. The scissor ladder folds up to only 4 cm thick, which facilitates its storage when it is not in use. He is also very comfortable to carry thanks to transport handle. This model has a maximum work height of 244 cm and a maximum load capacity of 150 kg.

  • Color: white and gray anthracite
  • Material: Steel
  • Dimensions: 50 x 49 x 45 cm (length x width x height)
  • Width/depth required for assembly: 50 x 49 cm
  • Total height: 45 cm
  • Platform height: 44 cm
  • Maximum working height: 244 cm
  • Maximum load capacity: 150 kg
  • Easy to save: folds up to only 4 cm thick
  • Hinge closure with release button
  • Practical transport mango
  • 2 large steps with non -slip surface
  • Plastic non -slip legs
Security instructions General information on security When using the staircase platform, possible risks must be taken into account. There is a risk of falling from the ladder platform or that it slips; There is also the risk of falling from an articulated step or a scissors that are on the ladder platform or that the articulated step or the scissors are turned; In such situations, people can be injured and objects can be damaged. There is also the risk of lesions for pinching and cutting points when manipulating the staircase platform. There is the risk of hand injuries because the fingers can be trapped. Therefore, all works with and on the staircase platform must be carried out in such a way that these risks are as low as possible.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.