Skip to product information
  • Vetonek Tabla de paddle surf inflable con vela verde y blanca

Inflatable paddle table with green and white candle

$365.31
$365.31 $411.14
You save 11% ($45.83)
Tax included. Shipping calculated at checkout.
Size
Color

Description

The Paddle Surf table is ideal for learning, recreational rowing and navigation of small waves, with comfort and stability. Equipped with high pressure thread valves, the table is inflated and disinflans easily and quickly. The two preferred fins and the removable fin are durable to resist rowing efforts. A practice transport bag is included to transport it quickly and easily. Our SUP Table has been designed with the perfect level of curvature, in order to improve the rigidity for a more stable walk. This table slides effortlessly on calm waters and sails softly while surfing. The inflatable SU table is punctured and resistant to UV rays and supports extreme nautical conditions. Keep in mind that it has been conceived for adults.

  • Color: green and white
  • Material: PVC, Eva, Aluminum, Fabric (100% Polyester)
  • Inflated dimensions: 330 x 72 x 10 cm (length x width x high)
  • Fin dimensions: 20.5 x 18.5 cm (long x width)
  • Rowing length: 215 cm
  • Candle size: 3 m²
  • Maximum number of people: 1 adult
  • Maximum load capacity: 100 kg
  • Maximum working pressure: 1 bar (15 psi)
  • Drilling and UV rays resistant
  • Delivery contains:
  • 1 x Surf table
  • 1 x rowing
  • 1 x candle
  • 1 x removable fin
  • 1 x high pressure manual pump with high pressure pressure gauge
  • 1 x Repair Kit: 3 -layer patch and patch
  • 1 x transport bag
GPSR

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.