Skip to product information
  • Keter Set de comedor de jardín 3 piezas Iowa capuchino 224383

Keter Garden Dining Set 3 pieces Iowa Capuchino 224383

$273.94
$273.94 $308.31
You save 11% ($34.37)
Tax included. Shipping calculated at checkout.
Size
Color

Description

With this luxurious garden furniture game composed of 2 Keter Iowa and a matching table, you can enjoy long afternoon and summer nights in your garden, on the balcony or on the terrace. The chairs have comfortable armrests and an ergonomic support for great comfort when sitting. A matching pillow is included. The table included has sides with a rattan and ribbons with a surface appearance and has a hidden storage compartment under the surface. This comfortable garden game is made of wear -resistant plastic, outdoors and maintenance free. Therefore, it will last for years without wear and tear or oxidize. Keter is part of a company that operates worldwide and offers a wide range of furniture, storage products and organization solutions. All produced in a sustainable way, practically free of maintenance and recyclable, and of course, the comfort and beautiful appearance have also been taken care of!

  • Color: Capuchin
  • Material: Plastic pp
  • Cushion material: 100% polyester
  • Easy to ride
  • Easy to keep clean
  • 7 mm flat rattan
  • Both for internal and exterior use.
  • Out -of -wheel residentie and UV rays
  • Table:
  • Dimensions: 39 x 39 x 42 cm (length x width x high)
  • It works as a chair or footrest
  • Provides a practical storage solution
  • Ratán Structure With Rezolith finish
  • Chair:
  • Dimensions: 62 x 60 x 89 cm (wide x high x high)
  • Seat height: 50.4 cm
  • Depth seat: 46.7 cm
  • Height Places: 64.9 cm
  • Maximum load capacity: 110 kg
  • Delivery includes:
  • 1 x table
  • 2 x chair with armrests
  • 2 x seat cushions
  • Material: Polypropylene: 100%

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.