Kitchen shelf with synthesized wooden hooks nexus oak smoked
Description
Free space in the countertop with this kitchen shelf that has a lot of storage space. Durable and resistant material: engineering wood has exceptional quality and a smooth surface, and is also characterized by its strength, stability and moisture resistance. The metal structure of kitchen storage guarantees its strength and stability. Shipment space storage: with 1 upper shelf for spices and 3 lower shelves for kitchen utensils, the kitchen storage shelf offers a wide storage space so that The kitchen is more organized. Practical Schedules: The microwave shelf comes with 4 hooks. Thus, you can freely hang the objects of frequent use and the pastry utensils, such as dough scratches, brushes, bathers and the like, depending on your needs and always having them by hand. Adjustable tanks: adjustable legs with plastic pads maintain the support of Balanced kitchen storage in irregular soils and increase stability. WARNING: To prevent it from turning, this product should be used with the setting device to the wall included. Useful information: screws and tacos for the interior of the wall are not included. We recommend finding and using adequate screws and tacos specifically for the walls. If you are not sure, you can consult with a professional. Read and continue every step of the instructions.
- Color: smoked oak
- Material: engineering wood, metal
- Dimensions: 84 x 40.5 x 170 cm (length x width x high)
- Max. Load capacity by level: 20 kg
- Requires assembly: Yes
- Legal Documents:
You can find more details on how to prevent furniture from turning here
¿Cuanto material necesitas?
¿Cuanto material necesitas?
How much stone do I need?
How much stone do I need for the ground?
For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.
For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.
For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm
How much stone do I need to fill a gabion?
Density of ± 1,650kg by 1m³.
The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.
Clarifications
ATTENTION!
Granulometries are sizes of sizes
Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.
Broken stones
On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.
In the photos you can see, only real products are seen, broken pieces have been removed.
Dust and sand in products
This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.