Skip to product information
  • Kleine Wolke Alfombra de baño Monrovia rosa 60x100 cm

Kleine Wolke Bathroom Carpet Monrovia Rosa 60x100 cm

$88.45
$88.45 $99.55
You save 11% ($11.10)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Do you hate getting out of the shower on the cold tiles of the bathroom floor? Here the comfortable and safe monrovia bathroom of Kleine Wolke is useful, pink and with 60 x 100 cm measures. The bathroom carpet also provides safety. This bathroom carpet has a non -slip back, to reduce the risk of slippers on the soil of wet and naked tiles. The Monrovia bathroom carpet, aged pink, has a solid color and has a cheerful striped design with a long and thick hair effect. It is made 100% polyester, which is a light cloth, which is soft and dries quickly. It is very resistant to wear and, therefore, has a long shelf life. Thanks to this material and at the height of the hair of no less than 21/23 mm, this carpet is pleasant, soft and thick, and it is a pleasure to step on it. This bathroom carpet can be washed in washing machine with a delicate cycle at 40 ° C and can be dry in low temperature dryer. This bathroom carpet is also excellent in combination with radiant soils.

  • Color: pink
  • Material: Polyester
  • Dimensions: 100 x 60 x 2.1 / 2.3 cm (length x width x high)
  • Hair height: 21/23 mm
  • Suitable for radiant soil heating
  • Striped design
  • Non -slip
  • Soft and warm
  • Washable in the washing machine at 40 ° C
  • In low temperature dryer

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.