Skip to product information
  • Vetonek Lámparas solares esféricas de exterior 2 uds LED RGB 50 cm

Lámparas solares esféricas de exterior 2 uds LED RGB 50 cm

$316.02
$316.02 $355.67
You save 11% ($39.65)
Tax included. Shipping calculated at checkout.
Tamaño
Color

Description

Nuestra lámpara solar LED esférica está equipada con una batería AA que se carga co energía solar durante el día y se enciende automáticamente cuando oscurece. Presenta un cambio de color en la luz y es la iluminación decorativa perfecta para jardines, patios, caminos, entradas de vehículos, etc. Con doce LED de 0,06 vatios en el interior, la lámpara solar puede proporcionar una iluminación de 0,72 vatios.Durante el día, la luz convierte la luz del día en electricidad y recarga la batería. Al anochecer, se enciende automáticamente y funciona con la electricidad almacenada durante el día. La duración de la luz depende de la cantidad de luz diurna almacenada. La lámpara solar ahorra energía y requiere poco mantenimiento. Gracias a los materiales de montaje incluidos, la luz solar exterior es fácil de instalar. La entrega incluye 2 lámparas solares.

  • Color: Blanco
  • Material: Polipropileno
  • Dimensiones totales: 50 x 71 cm (diámetro x alto)
  • Longitud del tubo: 32 cm
  • Fuente de alimentación: solar
  • Contiene 12 LED (12 x 0,06 W)
  • Con cambio de color en la luz.
  • Con batería AA recargable preinstalada (1,2V / NI-MH 600 mAh)
  • Materiales de montaje incluidos
  • La entrega incluye 2 lámparas solares.
Este producto no debe desecharse junto con otros residuos domésticos en la Unión Europea.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.