Skip to product information
  • Leifheit Botella de termo Flip azul agua 600 ml

LEIFHEIT BLUE BLUE BOTTLE WATER 600 ML

$38.76
$38.76 $43.62
You save 11% ($4.86)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This 600 ml thermo Flip bottle of Leifheit is the perfect choice for anyone who likes to enjoy tea or coffee while there is away from home. The combination of fine stainless steel and the live blue water color makes the insulating cup a real point of attraction. Double -layer insulation: Thanks to the double -steel double -steel insulation, drinks in the thermos flip remain hot up to six hours and cold up to 18 hours. 100 % leak -proof of leaking with sealed threaded cap: this isolated drink thermos is 100 % stagnant to liquids and, therefore, completely leak -proof. In addition, the lid button can be operated comfortably with the index finger. Tap with lock: an additional block in the lid prevents accidental opening. This means that the 600 ml thermos bottle can be carried in the bag without hesitation. : With a capacity of 600 ml, this isolated coffee thermos is ideal for daily use, either in the office, in the university or at school.

  • Color: Water blue
  • Material: stainless steel
  • Dimensions: 7.8 x 7.5 x 25 cm (wide x high x high)
  • Double -layer insulation
  • Keep hot drinks up to 6 hours and cold up to 18 hours.
  • Use with one hand
  • 100% leak -proof
  • Cover with lock
  • With folding handle
  • Removable filter
  • Good grip and easy opening.
  • Compact size
  • Easy and hygienic cleaning of all pieces (in the upper compartment of the dishwasher)
  • BPA free and other pollutants.
  • Capacity: 600 ml
To obtain the best isolation performance: - Preheat with hot water for approximately 2 minutes before filling with hot drinks - pre -hut with cold water for approximately 2 minutes before filling with cold drinks do not use to keep hot dairy products or baby foods ( bacterial growth risk). Do not use sharp, abrasive objects, solvents or bleaching agents to clean!

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.