Leifheit Digital Thermometer for roasts

$37.46
$37.46 $42.16
You save 11% ($4.70)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Do you want to cook meat perfectly prepared at the ideal temperature? No problem: with the digital thermometer for Leifheit roasts it is possible. With five cooked prejustments, seven different types of meat can be prepared to individual taste. As the 100 cm long measurement cable is heat resistant to 380 ° C, the thermometer can also be used for barbecues. Thanks to the individual temperature specification, it is also ideal for heating chocolate glazed or chocolates when baking. The cooked thermometer will notify you when the selected temperature is reached. The timer function allows the perfect cooking time to be adjusted individually. In addition, the digital thermometer to fry is easy and intuitive to use thanks to the touch screen (even with little light). The magnetic pins on the back of the device allow you to hold it easily. The thermometer also has a folding base to settle safely on the work surface. The appropriate batteries are included in the delivery so you can use the digital thermometer immediately.

  • Color: white and gray
  • Material: Plastic
  • Measurement cable length: 100 cm
  • Digital thermometer for frying and barbecue
  • 5 pre -established cooked adjustments for seven different types of meat
  • Measured measurement cable (up to 380 ° C)
  • Touch sensor screen with blue coating
  • Timer function
  • Temperature alarm
  • Folding base
  • Magnets on the back for easy baked or barbecue fixation
  • Necessary batteries: 2 x LR03 (AAA), 1.5 V (included)
Warning information about a potentially dangerous situation that can cause serious injuries or death. Caution Information about a potentially dangerous situation that can cause minor injuries. Note Information about a potentially dangerous situation that can cause material damage.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.