LEIFHEIT FUNDA FOR THE THERMO-REFLECT WAVE TABLE, GLIDE & PARK S/M

$45.73
$45.73 $51.47
You save 11% ($5.74)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This ironing case s/m Leifheit Glide & Park with Therm-Reflect technology converts your ironing table into a comfort model in an instant. Thermo-Reflect technology: This protective case of the ironing table guarantees greater comfort when ironing; The steam and the reflection of heat create a two -sided ironing effect that facilitates ironing. The special sliding zone increases the plate slip: a special sliding area loads the iron with static electricity so that it slides more easily over your clothes. Heat resistant parking area: In addition, the integrated parking area guarantees that the iron is safely parked in the ironing table. 4 mm thick molleton comfort padding: Molleton's padded 4 mm thickness guarantees an additional ironing comfort that makes the ironing remarkably more comfortable and delicate for your clothes. Universal case for the ironing table: the Leifheit Theifheit-Reflect glide & Park cover is an adequate replacement for the Leifheit Air Board ironing table and is suitable for all steam plates. It adapts to the ironing boards with sizes of up to a maximum of 125x40 cm.

  • Color: light blue and blue
  • Material: 27% cotton, 52% polyester, 8% polyurethane, 7% titanium, 1% silicone and 5% meta-aramid
  • Dimensions: 37 x 29 x 3 cm (wide x high x high)
  • For ironing tables with a max. 125 x 40 cm
  • Thermo-Reflect technology (the reflection of steam and heat guarantees an ironing effect on both sides)
  • The special sliding zone increases the landslide
  • Heat resistant parking area
  • Elastic cord with tension clip and hook closure
  • 4 mm thick comfort comforted molleton
  • Suitable for steam plates

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.