Skip to product information
  • Vetonek Lijadora de disco y banda 370 W 150 mm

Disc and band sander 370 w 150 mm

$271.31
$271.31 $305.35
You save 11% ($34.04)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This electric sander 2 in 1 combines an album sander and a band sander in a single unit. It will be perfect for sanding, smoothing and eliminating all dental edges and splinters of the wood. Thanks to its large dimensions, this sander even serves to sand large pieces of wood. The sanding machine has a incline sanding band that can be used vertically or horizontally or at any other angle in the middle. The sanding album table can also be tilted at any angle of up to 45 °. Thanks to hook and loop fixing closures, sandpaper can be easily installed or replaced. In addition, the sander is supplied with a meter for a precise angular sanding. The delivery also includes 9 additional disc roles and 3 additional band sandpaper papers.

  • Color: blue/black
  • Material: Metal and plastic
  • Sanding band dimensions: 100 x 915 mm (width x long)
  • Sanding disc diameter: 150 mm
  • Table dimensions: 22.5 x 16 cm (length x wide)
  • Food: 230 - 240 V ~, 50 Hz
  • Power: 370 W
  • Tape speed: 7.5 m/s
  • Speed ​​without load: 2980 rpm
  • 0 ° to 45 ° inclinable table
  • Inclinable work table from 0 ° to 45 °
  • With magnetic safety switch and groin caliber
  • Rapid replacement of the tape
  • With hook and loop fixing elements for sandpaper
  • Includes a total of 9 sandpaper discs and a total of 3 sandpaper bands
Do not allow children to play with the device. It is not a toy. Only users with technical skills should use the tool. Use personal protective equipment before using this product. Keep children and people away away while using an electric tool.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.