LITER WITH TOBOGAN AND STAIRD WOODING PINE 90X190 CM

$356.77
$356.77 $401.53
You save 11% ($44.76)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This wooden bunk with slide and ladder is designed to entertain and also to optimize the space. Robust and stable: solid pine wood is known for its resistance and durability. Its straight veins and their characteristic knots contribute to their rustic charm. Safety bonds: the intermediate bed for children has safety railings on the 4 sides, so that your child can sleep without worrying about falling. Complete space of space: the bed Lower of this children's litera is on the floor, so you can place a matt The room in a park inside. The combination of a staircase to climb and a slide makes the time of sleeping more lively and exciting for children. Useful information: delivery includes only bed frames. The mattresses are not included. You can take a look at our store to look for the corresponding mattress. WARNING: To prevent it from turning, this product should be used with the setting device to the wall supplied.

  • Bed:
  • Material: solid pine wood (without treating)
  • Dimensions: 195.5 x 97.5 x 113 cm (length x width x high)
  • Adequate mattress dimensions: 90 x 190 cm (width x long) (mattress is not included)
  • Slide:
  • Gray
  • Material: Plastic
  • Dimensions: 169 x 38.5 x 20.5 cm (length x width x high)
  • Suitable for children over 6 years old
  • Requires assembly: yes
  • Delivery contains:
  • 1 x litera
  • 1 x slide
WARNING. This bed is not suitable for children under six years due to the risk of drops due to falls. WARNING. High beds/beds may have a serious risk of strangulation injuries if they are not used correctly. Never set or hang elements anywhere in the litera/high bed that are not designed to use with the bed, for example, but not limited to strings, cords, hooks, belts and bags. WARNING. Children can be trapped between the bed and the wall, a inclined roof, the roof, adjacent furniture (for example, cabinets) and the like. To avoid the risk of serious injuries, the distance between the higher security barrier and the adjacent structure should not exceed 75 mm or must be more than 230 mm. WARNING. Do not use the litera/high bed if any structural part is broken or foul. WARNING. This product must be fixed to a wall or structure of a building.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.