Skip to product information
  • Madison Sombrilla de jardín Elba verde 300 cm

Madison Menor Garden Elba 300 cm

$148.12
$148.12 $166.71
You save 11% ($18.59)
Tax included. Shipping calculated at checkout.

Description

You can create a cozy shadow place in your garden or terrace with this Elba de Madison Garden umbrella! Comfortable opening mechanism: This garden umbrella is equipped with a simple opening system, to open and close it effortlessly. This allows you to place the umbrella in the blink of an eye. Tilt and prestressed mechanism: it has a useful inclination mechanism that allows to incline the grill of the umbrella towards the sun. In addition, the Elba has an exclusive prestressing system, so that the fabric is always very tense. Made of oxide resistant aluminum. The large round fabric is made 100 % polyester with a layer of PA, so the Elba repels water and dirt. TV also has a 50+ UPF value, resistant to UV rays. Protection against the wind: This umbrella is equipped with wind protection that prevents it from between the wind and flying out. Always use an umbrella base with a minimum weight of 40 kg. (The base is not included).

  • Color: Green
  • Structure material: aluminum
  • Fabric material: 100% polyester (180 g/㎡) with PA coating
  • Dimensions of the umbrella: 300 x 250 cm (high diameter x)
  • Post diameter: 3.5 cm
  • UV protection factor: 50+
  • Repeals water and dirt
  • Adjustable height
  • Practical inclination mechanism
  • Exclusive size system
  • Opening system
  • Equipped with wind protection
  • 6 rods
  • Minimum weight of the umbrella base: 40 kg
Attention! -Stem the plastic bags out of the reach of babies and children.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.