Skip to product information
  • Vetonek Manguera de aire PVC azul 19 mm 2 m

Blue PVC air hose 19 mm 2 m

$18.16
$18.16 $20.44
You save 11% ($2.28)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This air hose will be an ideal choice for your compressor, whether you use it at home and in commercial environments. Durable material: The hose for air compressor is made of PVC. Polyvinyl chloride (PVC) allows the hose to work in extreme weather thanks to its weather resistance and UV rays. It is also oil resistant and abrasion, so it offers a long -term service. High resistance: the compressor hose, with an internal diameter of 13 mm and an outer diameter of 19 mm, offers a maximum working pressure of up to up to 10 bar and a maximum breakage of 30 bar. Thanks to light design, it is also easy to save and transport. It is suitable for pneumatic keys, spray guns, pneumatic nail guns and other tools that need compressed air.

  • Color: blue
  • Material: polyvinyl chloride (PVC)
  • Length: 2 m
  • Thickness: 3 mm
  • Interior diameter: 0; 5 "(13 mm)
  • Exterior diameter: 0; 7 "(19 mm)
  • 3 -layer reinforced fabric
  • Work pressure range: 10 ~ 30 bar (145 ~ 425 psi)
  • Operating temperature range: -10 ~ 60 degrees
  • Delivery contains:
  • 1 x air hose
  • 1 x air coupling
  • 1 x plug

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.