Skip to product information
  • Vetonek Manguera porosa para jardín caucho negro 16 mm 10 m

Manguera porosa para jardín caucho negro 16 mm 10 m

$20.94
$20.94 $23.56
You save 11% ($2.62)
Tax included. Shipping calculated at checkout.
Tamaño
Color

Description

Esta flexible manguera porosa para jardín está diseñada para el riego y la irrigación de jardines y es perfecta para un uso doméstico o comercial. Material duradero: Esta manguera de goteo está hecha de caucho y es ligera, flexible y resistente, lo que permite la permeabilidad del agua en toda su longitud.Riego eficaz: Con una longitud de 10 m, la manguera de riego para jardín alcanza todas las plantas o cultivos para conseguir un riego uniforme.Manguera útil: La descarga por goteo de toda la manguera evita que se inunde el suelo de forma eficaz, mantiene las hojas secas y ayuda a ahorrar agua al mismo tiempo.Fácil de guardar: La manguera porosa de remojo puede enrollarse en forma de espiral fácilmente para su almacenamiento y transporte.

  • Color: Negro
  • Material de la manguera porosa: Caucho
  • Material de la conexión: ABS
  • Longitud de la manguera porosa: 10 m
  • Diámetro exterior: 0;6" (16 mm)
  • Diámetro interior: 0;5" (12 mm)
  • Diámetro de la conexión: 12,7 mm (1/2")
  • Presión de trabajo máxima: 4 bar (58 PSI)
  • Temperatura mínima de funcionamiento: 0 grados
  • Temperatura máxima de funcionamiento: 80 grados
  • Requiere montaje: Sí
  • La entrega contiene:
  • 1 x Manguera porosa
  • 1 x Conector con tope gris
  • 1 x Conector sin tope gris

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.