Skip to product information
  • Vetonek Sillón reclinable de masaje tela de microfibra gris claro

Massage reclining armchair of light gray microfiber fabric

$216.66
$216.66 $243.85
You save 11% ($27.19)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Sit down and rest in this very comfortable reclining armchair! Manual reclining function: This reclining chair has a handle on the right side. Just pulling it, you can manually adjust the restraint and support for any position that is comfortable. This function allows a maximum inclination of 135 degrees. In addition, the support quickly returns to its original position just by pulling the handle. Massage function: the 6 massage points allow you to experience a better directed massage. In addition, the included command allows you to choose different massage programs. The massage function works with the USB connector, but the USB USB supply source is not included. And cozy that will make you feel wrapped while sitting. The microfiber is a synthetic tissue composed of ultrafine fibers, which are especially resistant to the spots. Portive and side pocket spots: This armchair has two comfortable holders for drinks and a side pocket so that you have your things at your fingertips. Solid and stable structure: the structure, made of wood and metal, provides strong structure and stability. This reclining armchair is comfortable and durable.

  • Color: light gray
  • Material: microfiber fabric (100% polyester), metal, plywood wood
  • Filling material: foam, pp fiber
  • Sitting dimensions: 72 x 90 x 99 cm (wide x high x high)
  • Limited dimensions: 72 x 144.5 x 80 cm (wide x high x high)
  • Seat width: 50 cm
  • Seat depth: 36.5 cm
  • Seat height from the ground: 43-44.5 cm
  • Height of the headquarters from the ground: 56 cm
  • Options: heatless massage
  • Massage type: 6 -point vibration massage
  • Input voltage: 5 V CC
  • Input current: 2 A
  • Max. Weight capacity: 110 kg
  • Requires assembly: Yes
This device can be used by children over 8 years and people with reduced physical, sensory or mental abilities or who lack experience and knowledge, provided they are under supervision or have received instructions on the use of the device safely and understand the hazards that entails. Children should not play with the device. User cleaning and maintenance should not be made by children without supervision. Keep in mind that you should use only a CC input of 5 V certified. A higher voltage can cause overheating and cause damage to the device and a possible risk of overheating and fire.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.