Meccars for children 2 UDS Maciza Wooden Alamo Marrónes

$117.04
$117.04 $131.73
You save 11% ($14.69)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Relax and enjoy the outdoors in these comfortable wooden rocking chairs! Durable and comfortable: The rocking chair has a robust Álamo wooden frame, which guarantees its durability. Its soft balancing movement provides a soothing effect, allowing your children to relax comfortably. Security: The special angle of the feet of the chair and the anti -overturning design obtained after years of experience protect your son from the risk of overturn. Lamas Design: The rocking chair has a Lamas design that allows water to flow and ventilate. Easy to clean: the rocking chair is painted, which makes it water resistant, easy to clean and easy to maintain. Large uses: The versatile design of the rocking chair allows it to place it anywhere, from a porch covered to a patio, garden, balcony, or inside the living room, providing your child with a comfortable place to rest and play. Useful information: To make sure that your outdoor furniture stays beautiful, we recommend protecting them with an impermeable case.

  • Color: Brown
  • Material: Alamo wood
  • Total dimensions: 36 x 46.5 x 57 cm (wide x high x high)
  • Seat dimensions: 27.5 x 30 cm (deep x width)
  • Seat height from the floor: 28 cm
  • Height of the headquarters from the ground: 37.5 cm
  • Maximum load capacity: 110 kg
  • Adequate ages: 3-6 years
  • Requires assembly: Yes
  • Delivery contains:
  • 2 x Maddoo
Do not place this product near a window, since it can be used as a step by the child and cause it to fall out the window. Take into account the risk of open fire and other strong heat sources in the vicinity of the product. Do not place this product near a window where the cords of the blinds or curtains can strangle a child.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.