Skip to product information
  • Vetonek Mesa consola madera maciza de teca 110x35x75 cm

Massy wood console table 110x35x75 cm

$168.23
$168.23 $189.34
You save 11% ($21.11)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This beautiful console table is a striking addition to your home with its striking design. Robust and stable: solid teak wood is a beautiful natural material. It has been cured, baked and then finely sanded to give it a very soft look. Teak wood is known for its exceptional strength and weather resistance. ROBUST SUPERFICIE: The console table has a resistant board, on which you can place your decorative objects, photo albums or small plants. Multiple uses: The console table has multiple uses. You can place it at the entrance to store keys, magazines and a receiver lamp. You can also place it near a window to expose your beloved plants. In addition, when you need an auxiliary table in your living room, the console table will perfectly fulfill that function.

  • Material: Sound Teak Wood with degraded finish
  • Dimensions: 110 x 35 x 75 cm (width x width x high)
  • With 3D -shaped legs
  • Requires assembly: Yes

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.