Skip to product information
  • Vetonek Mueble de TV OLDEN madera maciza pino gris y marrón 114x43x57cm

Mueble de TV OLDEN madera maciza pino gris y marrón 114x43x57cm

$151.66
$151.66 $170.69
You save 11% ($19.03)
Tax included. Shipping calculated at checkout.
Tamaño
Color

Description

Este moderno mueble para TV de madera posee un diseño escandinavo y está pensado para ser un complemento tanto decorativo como práctico para la decoración de la casa. Madera maciza de pino: La madera maciza de pino es un hermoso material natural. La madera de pino tiene vetas rectas, y los nudos dan al material su característico aspecto rústico. Hecho de madera maciza de pino, el soporte de TV es robusto y estable.Amplio espacio de almacenamiento: El aparador de TV ofrece suficiente espacio de almacenamiento para mantener tus artículos esenciales bien organizados y al alcance de la mano.Función de exposición: La robusta parte superior del soporte de TV es ideal para exponer plantas, fotos enmarcadas y otros objetos decorativos.Patas de madera: Las patas de madera confieren al mueble un aspecto natural y agradable, al tiempo que garantizan su estabilidad. Combina bien con cualquier decoración de interior. Advertencia:Para evitar que vuelque, este producto debe usarse con el dispositivo de fijación a la pared suministrado.

  • Color: Gris y marrón
  • Material: Madera maciza de pino con acabado de cera, madera de ingeniería
  • Dimensiones: 114 x 43 x 57 cm (ancho x profundo x alto)
  • Dimensiones de la puerta: 33 x 34,5 cm (ancho x alto)
  • Cuenta con 2 puertas y 2 compartimentos abiertos
  • Gama: OLDEN
  • Requiere montaje: Sí
  • Legal Documents:

    Puedes encontrar más detalles sobre cómo evitar que los muebles se vuelquen aquí

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.