Skip to product information
  • Vetonek Mueble zapatero de contrachapada gris brillo 54x34x183 cm

Mueble zapatero de contrachapada gris brillo 54x34x183 cm

$212.50
$212.50 $212.50
Tax included. Shipping calculated at checkout.
Tamaño
Color

Description

¡Mantén tus zapatos organizados y siempre a mano con nuestro mueble zapatero! Este mueble está hecho de madera contrachapada de calidad, que es duradero y robusto para ofrecer una larga vida útil. Tiene un diseño simple, que puede encajar fácilmente en tu hogar. Con un amplio espacio con 22 compartimentos, en esta estantería se pueden colocar muchos zapatos, cajas de almacenaje, utensilios, coleccionables, etc. En la entrega, se incluyen los accesorios de montaje en la pared y un anclaje de pared para evitar que el mueble vuelque. Es fácil de limpiar con un paño húmedo. El zapatero es fácil de montar.

  • Color: Gris brillante
  • Material: Madera contrachapada
  • Dimensiones: 54 x 34 x 183 cm (largo x ancho x alto)
  • Altura del estante (cada uno): 15 cm
  • Con 22 estantes
  • Fácil de limpiar con un paño húmedo
  • Para evitar el vuelco, este producto debe usarse con el dispositivo provisto para fijarlo a la pared.
  • Ten en cuenta que los tornillos y los tacos para el interior de la pared no están incluidos. Busca y utiliza tornillos y tacos adecuados para tus paredes. Si no lo tienes claro, busca asesoramiento profesional. Lee y sigue cada paso de las instrucciones cuidadosamente.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.