Skip to product information
  • Vetonek Mueble zapatero madera contrachapada gris hormigón 55x35x108 cm

Zapatero wooden plywood gray concrete 55x35x108 cm

$153.28
$153.28 $172.50
You save 11% ($19.22)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This shoemaker furniture is an excellent furniture to get rid of the daily chaos of shoes. It will be great in the hall, the living room, the bedroom or any other room. Durable material: the plywood has an exceptional quality, with a smooth surface and also has strength, stability and moisture resistance. Sampling Storage space: This shoemaker has 7 compartments, which provide ample space to keep the shoes to the shoes to the Scope and well organized. Practice: keep your things clean when hiding them behind the door of this shoemaker closet. Note: Each product comes with a mounting manual in the box to facilitate assembly. WARNING: To avoid overturning, this product should be used with the device provided to fix it to the wall.

  • Color: concrete gray
  • Material: plywood, aluminum
  • Dimensions: 55 x 35 x 108 cm (wide x high x high)
  • Storage space for approximately 14 pairs of shoes in total (depending on the size of the shoes)
  • Legal Documents:

    You can find more details on how to prevent furniture from turning here

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.